Home & DIY

Tile Calculator

Tiles needed = area ÷ area of one tile, plus a waste allowance, rounded up. A 10 ft × 12 ft floor (120 sq ft) with 12 × 12 inch tiles needs 120 tiles before waste and 132 tiles with 10% extra. In boxes of 10, that is 14 boxes.

Area to tile
ft
ft
sq ft
in
in
in

e.g. 0.125 for 1/8″

%
$

Tiles to buy

—

—

Area to cover
—
Tiles without waste
—
Coverage per tile (incl. grout)
—
Boxes to buy
—
Spare tiles after the job
—
Estimated tile cost
—

—

How to use the tile calculator

  1. Area to tile. Enter the length and width of the floor or wall in feet, or switch to I know the sq ft if you have already worked out the area. For L-shaped or irregular rooms, use the square footage calculator first, then enter the total here.
  2. Tile size in inches, as printed on the box (for example 12 × 24).
  3. Grout joint width in inches. Leave it at 0 for a quick estimate, or enter your planned joint, such as 0.125 for 1/8 inch, for a more precise count.
  4. Waste allowance. Extra tile for cuts, breakage and mistakes. 10% is a common starting point for straight layouts.
  5. Tiles per box and price per box (optional) to see how many boxes to order and what they will cost.

The tile formula

Coverage per tile (sq ft) = (tile width + joint) × (tile length + joint) ÷ 144 Tiles without waste = area ÷ coverage per tile Tiles to buy = tiles without waste × (1 + waste % ÷ 100), rounded up Boxes = tiles to buy ÷ tiles per box, rounded up

Dividing by 144 converts square inches to square feet, because one square foot is 12 inches × 12 inches.

Worked example: a 10 × 12 ft bathroom floor

  • Area: 10 × 12 = 120 sq ft
  • Tile: 12 × 12 inches = 144 sq in = 1 sq ft each
  • Tiles without waste: 120 ÷ 1 = 120
  • With 10% waste: 120 × 1.10 = 132 tiles
  • Boxes of 10: 132 ÷ 10 = 13.2, round up to 14 boxes (140 tiles)

With 1/8 inch grout joints, each tile covers (12.125 × 12.125) ÷ 144 ≈ 1.0209 sq ft, so the floor needs about 117.5 tiles before waste and 130 tiles with 10% extra.

Tiles per square foot for common sizes

Tile sizeArea per tileTiles per sq ft (no grout)
4 × 4 in0.111 sq ft9
6 × 6 in0.25 sq ft4
3 × 12 in (subway)0.25 sq ft4
12 × 12 in1 sq ft1
12 × 24 in2 sq ft0.5
24 × 24 in4 sq ft0.25

How much waste to allow

Every tile job produces offcuts at walls, corners, door frames and around fixtures, and a few tiles break or turn out to have flaws. That is what the waste allowance covers. There is no single correct figure, but tile retailers and installers commonly suggest:

  • Around 10% for a straight (grid) layout in a simple, rectangular room.
  • 15% or more for diagonal, herringbone or other patterned layouts, which need far more cuts.
  • More again for small rooms with lots of corners, large-format tiles where one bad cut wastes a lot of material, or natural stone with variation you may want to sort through.

Your installer is the best judge for your specific room and pattern. It is also wise to keep a few spare tiles after the job: if a tile cracks years later, an exact match may no longer be sold.

Floors vs walls

The math is the same for walls: use the wall’s width and height instead of length and width. For a shower or backsplash, measure each wall separately, subtract windows or other areas you won’t tile, and add the walls together. Wall tile often involves more cuts around outlets, niches and fixtures, so many people use a slightly higher waste allowance. Papering the remaining walls instead? The wallpaper calculator works out rolls with the strip method.

Before you order

  • Check the coverage on the box. Manufacturers usually print the square feet per box. Compare it with the calculator’s result as a sanity check.
  • Buy from the same lot. Tiles from different production runs can differ slightly in shade and size, so buy everything at once.
  • Confirm the actual size. “Nominal” tile sizes can differ slightly from the true dimensions. For precise work, measure a tile.
  • Remember the extras: thinset or adhesive, grout, spacers, trim pieces and sealer are bought separately.

Frequently asked questions

How many tiles do I need per square foot?

Divide 144 by the area of one tile in square inches. 12 × 12 inch tiles cover 1 sq ft each, so you need 1 per square foot. 6 × 6 inch tiles cover 0.25 sq ft, so you need 4 per square foot. 12 × 24 inch tiles cover 2 sq ft, so you need 0.5 per square foot.

How much extra tile should I buy?

Tile retailers and installers commonly suggest around 10% extra for a simple straight layout, and more, often 15% or higher, for diagonal, herringbone or other patterns that need many cuts. Small or irregular rooms and large-format tiles can also need more. Ask your installer for their recommendation and keep a few spare tiles for future repairs.

Do grout lines change how many tiles I need?

Slightly. Each grout joint adds to the space a tile covers, so you need a few fewer tiles. With 12 × 12 inch tiles and 1/8 inch joints, 120 sq ft needs about 118 tiles before waste instead of 120. For small tiles, such as mosaics, the effect is larger.

Should I buy all my tile at once?

Yes, where possible. Tiles from different production runs (dye lots) can vary slightly in color and size. Buying everything together, plus your waste allowance, avoids mismatched tiles.

Does the calculator work for wall tile?

Yes. Enter the wall’s width and height instead of length and width. Measure each wall separately, subtract large openings such as windows and doors if you won’t tile them, and add the areas together.