What are home and DIY calculators?
Home and DIY calculators turn room measurements and product sizes into the quantities and costs you need before buying materials or comparing contractor quotes. The calculators on this page cover area, tile, wallpaper, fencing, roofing and the cost of running appliances, and each one shows the formula so you can double-check your order.
Which home calculator should I use?
| Your project | Calculator |
|---|---|
| Measuring a room, an L-shaped space, a countertop or a lot | Square footage calculator |
| Tiling a floor, shower or backsplash | Tile calculator |
| Papering walls | Wallpaper calculator |
| Building a fence with posts, rails and pickets | Fence calculator |
| Pricing a new roof from your quote | Roof cost calculator |
| Working out what an appliance costs to run | Electricity cost calculator |
Start every project with accurate measurements
Almost every home calculation starts with area: length × width for rectangles, base × height ÷ 2 for triangles and π × radius² for circles. Measure at floor level, measure every wall (older rooms are rarely perfect rectangles), round up to the next inch, and split odd shapes into simple pieces. The square footage calculator adds up to three areas and converts between feet, inches, yards and meters.
From area to an order quantity
Area is not the amount to buy. Materials are cut to fit, some pieces break, and patterns need matching, so each calculator adds the allowance that matters for that material:
- Tile uses a waste percentage, commonly around 10% for straight layouts and more for diagonal or patterned ones. See the tile calculator.
- Wallpaper uses the strip method, which counts full-height strips per roll and allows for pattern repeat. See the wallpaper calculator.
- Fencing counts sections between posts, plus one post to close the run and one per gate. See the fence calculator.
- Roofing converts the footprint to roof area with a pitch factor, then into 100 sq ft “squares” with a waste allowance. See the roof cost calculator.
Costs you can control
Running costs add up as quietly as material costs. The electricity cost calculator uses watts × hours ÷ 1,000 to get kilowatt-hours, then multiplies by the rate on your bill, so you can see what a space heater, a fridge or a game console really costs per month and per year.
Why we don’t show average prices
Material and labor prices vary by region, season and product, and averages can be far from your real quote. Our calculators work out quantities exactly and let you enter prices from your own supplier or contractor, so the cost estimate reflects your project.
Frequently asked questions
Should I buy extra material?
Usually yes. Beyond the waste allowance, keeping a few spare tiles, a spare roll of wallpaper or extra pickets helps with future repairs, since an exact match may not be sold later. Buy from the same batch or lot to avoid color differences.
Do the calculators work in metric?
The square footage calculator accepts feet, inches, yards, meters and centimeters and shows square meters. The other home calculators use U.S. units.
Can these replace a contractor’s measurement?
They are planning tools. Use them to budget and to check quotes, but have your installer confirm quantities, especially for roofs, which should not be measured without proper safety equipment.