Home & DIY

Electricity Cost Calculator

Energy (kWh) = watts × hours ÷ 1,000, and cost = kWh × your rate per kWh. A 1,500-watt space heater running 4 hours a day uses 6 kWh a day. At $0.17 per kWh that costs $1.02 a day, $30.60 a 30-day month and $372.30 a year.

watts
h
days
$per kWh

Example rate. Use the price per kWh on your electricity bill.

Cost per month (30 days)

—

—

Cost per hour of use
—
Cost per day of use
—
Cost per year
—
Energy per day of use
—
Energy per month (30 days)
—
Energy per year
—

—

How to use the electricity cost calculator

  1. Enter the appliance’s power use in watts and how many of them you run. For example, 10 LED bulbs of 9 watts each.
  2. Enter how many hours a day it runs and on how many days a week.
  3. Enter your electricity rate in dollars per kilowatt-hour, from your bill.

You get the cost per hour, day, 30-day month and year, plus the energy used in kWh.

The formula

kWh per day = watts × hours per day ÷ 1,000 Cost per day = kWh per day × rate per kWh Cost per month (30 days) = cost per day × 30 × (days used per week ÷ 7) Cost per year = cost per day × 365 × (days used per week ÷ 7)

Dividing by 1,000 converts watt-hours into kilowatt-hours (kWh), the unit your utility bills you in. One kWh is 1,000 watts used for one hour.

Worked example: a space heater

A 1,500-watt space heater runs 4 hours a day, every day, at $0.17 per kWh.

  1. Energy: 1,500 × 4 ÷ 1,000 = 6 kWh a day
  2. Daily cost: 6 × $0.17 = $1.02
  3. Monthly: 6 × 30 = 180 kWh × $0.17 = $30.60
  4. Yearly: 6 × 365 = 2,190 kWh × $0.17 = $372.30

Running it for 2 hours a day instead halves all of these figures.

Finding the numbers

Wattage

Check the label or nameplate on the appliance, the manual, or the power adapter. If the label shows amps and volts instead, multiply them: a device rated 1.5 amps at 120 volts uses up to about 180 watts. For many appliances sold in the U.S., the yellow EnergyGuide label shows an estimated yearly electricity use in kWh, based on average use. Multiply that figure by your rate for a quick yearly cost, or divide it by 365 for a daily average.

Your rate per kWh

Your bill lists the price per kWh, sometimes split into supply and delivery charges. For the most realistic estimate, add the per-kWh charges together. If your plan has time-of-use pricing, use the rate for the hours the appliance usually runs. Fixed monthly service fees don’t change with usage, so leave them out.

Why real costs can differ

  • Cycling appliances: refrigerators, freezers, air conditioners, heaters and water heaters switch on and off with a thermostat, so they rarely draw full power all the time.
  • Variable power: computers, TVs and game consoles use different amounts depending on what they are doing.
  • Standby power: many devices draw a little power even when “off”. Smart power strips or unplugging can help.

For appliances like these, a plug-in electricity usage monitor that measures actual kWh over a few days gives a far better estimate than the label wattage.

Ways to lower the cost

  • Use it less or at cheaper times: cost scales directly with hours, so halving the time halves the cost. Time-of-use plans reward running appliances off-peak.
  • Choose efficient models: compare the EnergyGuide yearly kWh figures when buying.
  • Heat or cool smarter: sealing drafts and adding insulation reduce how long heaters and air conditioners run.

To see how much a rate change affects your bill, use the percentage increase calculator. Planning a bigger home project? The roof cost calculator estimates roofing materials and cost.

Frequently asked questions

How do I calculate the cost of running an appliance?

Multiply the appliance’s wattage by the hours you use it each day and divide by 1,000 to get kilowatt-hours (kWh) per day. Multiply by your electricity rate per kWh to get the daily cost, then by the number of days for a month or year.

Where do I find my electricity rate?

Your electricity bill shows the price you pay per kilowatt-hour. If your bill has several charges (supply, delivery, taxes), divide the total of the usage-based charges by the kWh you used for an all-in rate. Some plans charge different rates at different times of day.

Where do I find an appliance’s wattage?

Look on the label or nameplate on the back or bottom of the appliance, in the manual or on the charger. If only amps and volts are listed, watts ≈ volts × amps. An inexpensive plug-in electricity monitor measures actual use most accurately.

Do appliances always use their full rated wattage?

No. The wattage on the label is usually the maximum. Fridges, air conditioners and heaters cycle on and off, and many devices draw less than their rating most of the time. For those, use an average wattage or a measured kWh figure for a better estimate.

What is a kilowatt-hour?

A kilowatt-hour is 1,000 watts used for one hour. A 100-watt device running for 10 hours uses 1 kWh, as does a 1,000-watt device running for one hour.

Sources and formula references

  1. U.S. Department of Energy – Energy Saver guide: tips on saving money and energy in your home (2022)